It has a built-in night light in each camera that is controlled from the monitor and is effective up to 450 feet in a straight uninterrupted  line. The Digital Wireless Monitor is the answer for any situation that may experience any kind of radio interference.  The leading edge encrypted frequency hopping technology guarantees privacy and prevents traditional interference from other technology devices such as cordless phones, wireless computer routers and microwave ovens.  This new ultra digital wireless technology provides secure audio and video with exceptional quality.

Key SB-2000 Highlights

Night Vision

This camera has the ability to view images in low light conditions or full darkness. It is important to use the provided Power Adaptor (and not the Batteries) when using the Camera for prolonged periods of time in low light conditions, or full darkness, as the Night Vision will drain the battery more quickly than regular daytime use.

Versatile Camera Stand
The Camera can be placed on a flat surface like a table or a dresser, or wall mounted. The stand has several joints to allow for many different viewing angles.

Easy To Add Additional Cameras
The system comes with cameras that have already been paired to the receiver. These cameras will automatically communicate with the receiver once powered on. It is very easy to add up to 3 additional cameras.

True Wireless Abilities
The receiver is designed to be portable and can receive wireless transmission up to 450ft. max. from the camera.

The Camera operates either from a wall plug or with batteries

Recharging and Power

• The Receiver comes with a cradle for recharging but can be charged directly with the power cord. The receiver will still function normally while recharging in the cradle.

• The Camera comes with a power adaptor for long term use. When using the power adaptor, the camera will not use the batteries as a power source. This is ideal when there is a sudden power outage.

Power Saver Mode
With the Power Saver Mode turned on, the receiver can function longer in between full charges as it uses less power in this mode. The Power Saver Mode turns off the receiver's display and audio  until the Camera detects noise. Once noise is detected from the camera the receiver will alert you with the alarm, and will automatically activate the display and audio.

Audio and Audio Detection
Audio is one-way from camera to receiver. The receiver volume can be adjusted using the UP and DOWN arrow buttons when viewing a camera. When the volume is set to one bar (lowest setting), the volume is muted. Audio Detection Sensitivity can be adjusted by scrolling up or down on the Camera’s Sound Alarm Trigger. The audio detection is so sensitive it can detect the faintest of sounds.

PIP: the camera’s image can be displayed as PIP on a TV. This allows the user to monitor their camera, while watching TV.

Notification Messages
The "Out of Range" notification message is designed to notify you when the camera and receiver are not able to communicate with a strong signal. This allows for camera placement adjustments to help prevent image loss when actively monitoring.

When the camera and receiver can no longer communicate with each other a "No Signal" message will appear.

Audio / Video Out (A/V Out) The A/V Cable plugs into the cradle (or receiver) outputs, and into a TV/VCR or Monitor